Sharp UP-600 - Manual (Page 178)

178
Device Configuration Programming
Use the following procedure to select a device configuration programming:
1. In the SETTING window, select “14 DEVICE CONFIG.”
• The DEVICE CONFIG window will appear.
2. Select any option from the following options list:
01 R/J PRINTER: Receipt/Journal Printer (Bult-in
printer)
02 BILL (SLIP): Bill (Slip) printer
03 REPORT PRINTER: Report printer
04 VALIDATION (VP):
Validation printer
05 KP#1: Remote printer #1
06 KP#2: Remote printer #2
07 KP#3: Remote printer #3
08 KP#4: Remote printer #4
09 KP#5: Remote printer #5
10 KP#6: Remote printer #6
11 KP#7: Remote printer #7
12 KP#8: Remote printer #8
13 KP#9: Remote printer #9
14 BCR(SCANNER): Scanner
The following illustration shows those options included in the device configuration programming group.
14 DEVICE CONFIG 01 R/J PRINTER See “R/J Printer” on page 179 .
02 BILL (SLIP) See “Bill (Slip) printer” on page 179 .
03 REPORT PRINTER See “Report printer” on page 180 .
04 VALIDATION (VP) See “Validation printer” on page 180 .
05 KP#1
06 KP#2
07 KP#3
08 KP#4
09 KP#5
See “Remote printer” on page 181 .
10 KP#6
11 KP#7
12 KP#8
13 KP#9
14 BCR (SCANNER)
See “BCR (scanner)” on page 182 .
The screen continues.