Stanton DJ For Life - Manual (Page 6)

5
4 Channel stereo preamp mixer • 9 line and 4 phono inputs • 3 mic inputs
(combo and 1/4" connectors) • Gain and 3 band EQ (+9/-26 dB) per ch. • Mic
channel features 2 band EQ, independent level controls, ON/OFF switch, and
VCA controlled autotalk function • Sub-mic on channel 4 enables use of 3 band
EQ and panning • Fader start • Fully assignable crossfader (A, B, bypass)
• Master section with level and balance controls and mono/stereo switch • Beat
indicators • Balanced XLR master output • Booth output • Cue section
features, stereo/split function, cue pan and level control • Input and output LED
meters • 12V light BNC input • User replaceable faders.
I nput level / input impedance: Mic 1.5mv / 3k ohm, phono 3mv / 47k ohm, Line 150mv /
27k ohm Output level / output impedance: Master 1.24v / 100 ohm, Booth 1.24v / 100 ohm,
Rec 245mv / 100 ohm Gain: 20dB Tone: -26/+9 dB (Hi, Mid, Low) Frequency Response:
20Hz - 20K Hz +/-2dB T.H.D: Less 0.2% S/N Ratio: Less 70 dB Crosstalk: Less 60 dB
Autotalk: 0 ~ -26dB Beat: 80Hz Light: DC 12V Power supply: AC15V 500mA, Ac 12V
700mA Dimensions: (LxWxD): 8.75" x 19" x 3.5" (220 x 482 x 90 mm) (5U)
RM-80
OPTIONAL
Rotary knobs
(PART# RF-RM80)
RM SERIES MIXERS
4 Channel stereo preamp mixer • 9 line and 4 phono inputs • 3 mic inputs
(combo and 1/4" connectors) • Gain and 3 band EQ (+9/-26 dB) per ch.
• Effects send and return assignable to master out, each channel (including all
mics), and headphones for monitoring • Mic channel features 3 band EQ,
independent level controls, ON/OFF switch, and VCA controlled autotalk
function • Sub-mic on channel 4 enables use of 3 band EQ and panning • Fader
start • Fully assignable crossfader (A, B, bypass) • Master section with level and
balance controls and mono/stereo switch • Beat indicators • Balanced XLR
master output • Booth output • Cue section features, stereo/split function, cue
pan and level control • Cue pan fader is assignable to booth output for in-booth
monitoring • Input and output LED meters • 12V light BNC input • User
replaceable faders
Input level / input impedance: Mic 1.5mv / 3k ohm, phono 3mv / 47k ohm, Line 150mv / 27k
ohm Output level / output impedance: Master 1.24v / 100 ohm, Booth 1.24v / 100 ohm, Rec
245mv / 100 ohm Gain: 20dB Tone: -26/+9 dB (Hi, Mid, Low) Frequency Response: 20Hz
- 20K Hz +/-2dB T.H.D: Less 0.2% S/N Ratio: Less 70 dB Crosstalk: Less 60 dB Autotalk:
0 ~ -26dB Beat: 80Hz Aux: FX send: 0dB (0.775mV) FX return: 150mV Light: DC 12V
Power supply: AC15V 500mA, Ac 12V 700mA Dimensions: (LxWxD): 10.5" x 19" x 3.5"
(264 x 482 x 90 mm) (6U)
RM-100
OPTIONAL
Rotary knobs
(PART# RF-RM19)