Spectra Hello Kitty KT2053 - Manual (Page 12)

SLEEP TIMER OPERATION
You can use the SLEEP Timer to fall asleep to Radio or CD for 90, 60, 30 or 15 minutes intervals.
SLEEP OPERATION
1. In Power On mode, operate the Radio or CD as usual. Adjust the volume to the desired level.
Note: The level you selected for “Sleep to Music” is the same level you will hear when the alarm turns
“On”.
2. Press the SLEEP button. The display will show 90 minutes of playing time and then return to show the
current time mode in 3 seconds.
The radio will automatically turn off after 90 minutes has elapsed.
ADJUSTING THE SLEEP PERIOD
1. With the unit In POWER ON mode, press the SLEEP Button repeatedly to select the amount of sleep
time as follows:
Display SLEEP Timer Off Time
1 st Press 90 Shut off in 90 Minutes
2
nd
Press 60 Shut off in 60 Minutes
3 rd Press 30 Shut off in 30 Minutes
4
th
Press 15 Shut off in 15 Minutes
5 th Press Current time Shut off in 15 Minutes
2.
The unit will automatically turn off after the preset sleep time has elapsed. However, if you want to turn
the radio off before the preset sleep time has elapsed, press the POWER Button to switch the power off.
The POWER INDICATOR turns off.
Note:
i. If 90 or 60 minutes sleep time is selected and you are playing a CD that is only 48 minutes long, for
example, playback will stop at the end of the disc.
ii. Make sure the FUNCTION Selector is set to the CD or RADIO position before you press the SLEEP
Button. No sound will be heard if the FUNCTION Selector is set to the BUZZER position.
SLEEP AND WAKE TO BUZZER/CD/RADIO
1. Follow steps 1 to 4 (shown in P.6) under the “SETTING ALARM TIME” section to set the ALARM time.
2. Set your desired “WAKE TO” source as describe above in the “ALARM OPERATION” section. Follow
step 1 (shown above) under the “ADJUSTING THE SLEEP PERIOD” section to set the desired SLEEP
time.
The Radio is now programmed to turn off automatically at the Sleep Time you selected and then to turn on
again at the preset “Alarm Time”.
11