Samsung HC-P4363W - Manual (Page 51)

51
T V O
P E R AT I O N
Selecting a Digital Audio Source
Before selecting an audio source, be sure that the OPTICAL or COAXIAL audio inputs on the
rear of the TV are connected to the audio source.
The “Optical” and “Coaxial” options are for digital audio inputs, such as the Dolby Digital
(5.1ch), Dolby Prologic (4ch), DTS or MPEG.
1
Press the MENU button.
Press the … or † button to
select “Sound”, then press the
ENTER button. Mode : Standard √ √
Custom √ √
MTS : Stereo √ √
Auto Volume : Off √ √
Dolby Digital √ √
Digital Audio Input √ √
Move Enter Return
Sound T V
2
Press the … or † button to
select “Digital Audio Input”, then
press the ENTER button.
Press the … or † button to
select “Optical” or “Coaxial”,
then press the ENTER button.
Press the … or † button to
select a audio source, then press
the ENTER button.
Press the EXIT button to exit.
Optical : - - - - √ √
Coaxial : - - - - √ √
Move Enter Return
Digital Audio Input T V
- - - -
AV 1
AV 2
AV 3
S-Video 1
S-Video 2
Component 1
Component 2
• OPTICAL: converts the electric signal into an optical light signal, and transmits it through glass fibers.
A transmission system of digital audio in the form of a light wave, S/PDIF format using a glass
conductor.
• COAXIAL: The digital audio signal is received through a coaxial copper cable.
BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 51