Samsung HC-P4363W - Manual (Page 48)

T V O
P E R AT I O N
48
Setting the Dolby Digital
The “Dolby Digital” mode allows you enjoy Dolby Digital sound effect fully with the speakers
are connected to your TV.
This allows various modes for the main, center, surround and woofer speakers to be selected.
2
Press the … or † button to
select “Dolby Digital”, then press
the ENTER button.
The “Dolby Pro Logic II” is
selected.
Press the ENTER button again.
Press the … or † button to
select “On”, then press the
ENTER button.
1
Press the MENU button.
Press the … or † button to
select “Sound”, then press the
ENTER button. Mode : Standard √ √
Custom √ √
MTS : Stereo √ √
Auto Volume : Off √ √
Dolby Digital √ √
Digital Audio Input √ √
Move Enter Return
Sound T V
Dolby Pro Logic II : Off √ √
Dynamic Range : Off √ √
Level Control √ √
Time Delay √ √
Move Enter Return
Dolby Digital T V
Off
On
Enjoying Dolby Surround Sound
Converts and outputs mono and stereo audio signals into a 5.1 channel surround sound audio
signal.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Digital
Theater Systems, Inc. US Pat. No. 5,451,942,
5,956,674, 5,974,380, 5,978,762 and other
world-wide patents issued and pending. “DTS”
and “DTS Digital Surround” are registered trademarks of Digital
Theater Systems, Inc. Copyright 1996, 2000 Digital Theater
Systems, Inc. All Rights Reserved.
BP68-00342A-00Eng_TV 3/30/04 8:51 PM Page 48