Stanton M.203 - Manual (Page 10)

Using the M.203
7
4. Using the M.203
4.1 Top Panel Controls (Figure 4.1)
Figure 4.1
4.1.1 Fader Start
Fader start enables the Crossfader on the M.203 mixer to start and stop playback on a CD player. To use this function you need a
CD player (like Stanton’s C.324) with the Fader Start feature and its related cable. You can use this feature to trigger playback on a
deck that might be just out of physical reach or to do a fader based beat juggle between 2 decks.
The Fader Start switch activates the Fader Start feature. When the Fader Start switch is in the ON position, this function allows the
fader to activate or return to the preset Cue Point on your compatible CD Player.
Now, let’s customize the Crossfader curve.
4.1.2 Selecting the Crossfader Curve
1. Use the Crossfader Curve (CF CURVE) knob to select between a MIX or CUT fade for the Crossfader. Use the MIX setting
for fading between two sources. Select the CUT setting for scratching or rapid mixing.
4.1.3 Selecting the Meter Source
1. Use the Meter Select switch to select Selects if the Meter displays the pre-channel fader or Master volume. Select the
CUE position to listen to the Pre-Fader signal, using the Cue Fader to practice your mix before playing. Select the MASTER
position to listen to the sound from the Master Output through your headphones.