SIIG 4590 - Manual (Page 3)

3
4. Carefully align the card to the selected PCI slot,
push the board down firmly, but gently, until it is
well seated.
5. Replace the slot bracket's holding screw to secure
the card.
6. Replace the computer cover and reconnect the power
cord.
Driver Installation
Please make sure the board is installed before proceeding
with software installation.
Windows 98SE
1. Boot up Windows. At the Welcome to the PC
Card (PCMCIA) Wizard , select No, and click Next.
2. At the PC Card (PCMCIA) Wizard, select No,
then click Next.
3. Click Finish.
Note: If prompted for the Windows 98SE Installation
CD, click OK. Insert this CD, then click OK.
4. Restart Windows to complete the installation.
Windows ME/2000/XP/Server 2003
Windows ME, 2000, XP and Server 2003 will automatically
detect and install the correct drivers for the PC Card
adapter. Restart Windows if you're prompted to do so.