Snapper 150Z ZTR Series - Manual (Page 17)

15
MAINTENANCE
MAINTENANCE SCHEDULE
The following schedules should be followed for normal care of your rider and mower.
* More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer.
† These services should be performed by your dealer.
RIDER MAINTENANCE, All Models Before
Each Use Spring
& Fall 8
Hours 25
Hours 100
Hours 200
Hours Yearly
Clean Debris from Rider and Engine Compartment * •
Clean Debris from Engine Cooling Areas & Air Filter * •
Check Tire Pressure •
Lubricate Rider & Mower * •
Clean Deck & Check/Replace Mower Blades •
Clean Battery & Cables •
Check Rider Safety System ** • • •
Check / Adjust PTO Clutch •
ENGINE MAINTENANCE,
20HP Briggs & Stratton 8 Hours or
Daily 25 Hours or
Every
Season 50 Hours or
Every
Season 100 Hours or
Every
Season Yearly
Check Engine Oil Level * •
Service Air Pre-Cleaner * •
Change Oil * •
Service Air Filter * •
Change Oil & Filter * •
Clean Cooling Fins * •
Replace Air Filter * •
Replace Spark Plug •
Replace Fuel Filter † •
Check Valve Clearance † •