Sony CCU-D50 - Manual (Page 16)

16
Location and Functions of Parts
3 PANEL ACTIVE button
When the camera/camcorder connected to this unit is
being controlled remotely by a remote control unit
such as the RM-M7G, pressing this button causes the
button to light up and assumes control of the camera/
camcorder from this unit. The controls on the front
panel are enabled while this button is lit. Pressing the
PANEL ACTIVE button on another device causes this
button to go off and transfers control of the camera/
camcorder away from this unit. This button flashes
while the camera/camcorder is powered off.
4 CALL button
Press to call the camera/camcorder operator over the
intercom. Pressing this button lights the tally indicators
in the camera’s viewfinder and on this unit.
5 GAIN switch
Selects one of three video amplifier gain levels (HIGH,
MID, LOW). The gain values corresponding to HIGH,
MID, and LOW are set by using the menu on the
camera/camcorder.
6 DETAIL knob
Rotate to adjust the contours of objects in the picture.
7 MASTER GAMMA knob
Adjusts the gamma curve. The central click position of
the KNEE/M.GAMMA/DETAIL knob corresponds to
the camera/camcorder preset value.
8 KNEE adjustment section
AUTO KNEE switch
Pressing this switch, lighting it, to activate the auto
knee circuits and adjust knee automatically.
KNEE knob
Adjusts the knee point when the auto knee circuits are
off (when the AUTO KNEE switch is not lit).
9 WHITE/BLACK BALANCE adjustment section
WHITE/BLACK BALANCE switch
Selects the white and black balance adjustment mode.
AUTO: Selects auto adjustment mode, which allows
you to adjust the white or black balance by
pressing the WHITE or BLACK button. Adjusted
values are saved in camera/camcorder memory
and called up again when the switch is set to this
position again.
PRESET: The white balance value is returned to the
preset value. Black balance can be adjusted
automatically by pressing the BLACK button.
MANUAL: Selects manual mode, which allows you
to adjust the black and white balance with the
black balance and white balance adjustment
knobs.
BLACK (black balance automatic adjustment)
button
Adjusts the black balance automatically when the
WHITE/BLACK BALANCE switch is set to AUTO or
PRESET. This button lights when adjustment starts,
and flashes for eight seconds at an interval of about
one second if adjustment is completed successfully. If
adjustment could not be completed successfully, this
button flashes for eight seconds at an intervals of about
0.5 seconds.
KNEE
AUTO
AUTO KNEE switch
KNEE knob
AUTO
BLACK WHITE ATW
PRESET
R BLACK B
MANUAL
WHITE/BLACK BALANCE
R WHITE B
WHITE/BLACK BALANCE switch
BLACK button
WHITE button
ATW button
Black balance
adjustment knobs White balance
adiustment knobs