Spin Master Air Hogs Zero Gravity Micro User Manual

Spin Master For motorcycles

Advertising
background image

FOR INDOOR USE ONLY.

ADULT SUPERVISION RECOMMENDED!

TO GET THE MOST OUT OF
YOUR ZERO GRAVITY MICRO

WALL RACER PLEASE READ THESE
INSTRUCTIONS FIRST!

NOTE:
USE ON SMOOTH, CLEAN
SURFACES ONLY!

Check to make sure contents are
complete:

• 1 Zero Gravity Micro™ Wall Racer

• 1 Controller/Charger

• 1 Instruction Sheet

INSTRUCTIONS

TM

®

INSTALL BATTERIES

CLOSE

OPEN

Controller/Charger

Battery

Compartment

Door

Six

1.5-V AA

Alkaline

Batteries or

Rechargeable

Batteries

Battery

Compartment

CHARGING YOUR ZERO GRAVITY MICRO

WALL RACER

1.

Switch

car to

“OFF”

.

3.

Take

out

charge

nozzle.

4.

Plug cable

into port

of vehicle.

Make sure

the arrow is

on top.

6.

Green light

flashing: Vehicle

is charging.
Green light off:

Vehicle is charged.

• Charging should take between 30 and 50 minutes depending on how much charge is left in car.
NOTE: Do not charge battery immediately after use. Let car battery cool for at least 10 minutes. If charging is not complete in 50 minutes,

replace the charger batteries.

Your Zero Gravity Micro

Wall Racer has a pre-installed rechargeable

battery inside the vehicle body.

2.

Switch

controller/

charger to

“OFF”

.

5.

Slide

switch on

controller/

charger to

CHARGE”.

7.

When charged,

turn controller/

charger switch

OFF”.

8.

Stow

charge cable

in storage

compartment.

PROBLEMS?

Before you return to retailer, please call our HOTLINE for assistance,

1-800-622-8339

Zero Gravity Micro

Wall Racer

Controller/Charger

Advertising