Sirius Satellite Radio SP-R2 - Manual (Page 32)

Sportster SP-R2 User Guide
32
Changing the Lock/Unlock Code
The first time the Lock/Unlock function is accessed,
the user must enter the default lock code. The default
lock code is “0000”. This code can be maintained or
changed. To change the default lock code, perform the
following procedure while in the “Menu Options” List
mode:
1. Use the Rotary Knob to highlight the “Lock Options”.
Press the Rotary Knob to select.
2. Select “Edit Code” from the Lock Options Menu
(below left) and press the Rotary Knob to select.
3. Enter the default code “0000”.
4. The “New Code” prompt will appear. Enter your new
four digit code using the 0-9 number buttons (below
right). You will then be prompted to confirm the new
code by entering your code again.
5. The lock code is now changed.
Note: you can use this same method to Edit the code
once it is changed from the default.
Lock Options
The Sirius Sportster Receiver has the ability to
lockout the use of any channel, or channels you do
not want others to access without your permission.
Like the Skip feature, the locked channel will not
appear when the user changes channels with the
Rotary Knob. When the user tries to access the
locked channel using the Direct Tuning function, the
“Enter Code” screen will be displayed and the
channel will not be accessed until the proper code is
entered.
While in the “Menu Options” List mode, follow the
steps below to Lock a channel:
1. Use the Rotary Knob to highlight the “Lock
Options”. Press the Rotary Knob to select.
2. Select “Lock/Unlock” from the Lock Options Menu
(below left) and press the Rotary Knob to select.
3. Use the Rotary Knob to select the channel you wish
to lock. Press the Knob in to select (below right).