Saint Gobain Vidros PFD1 - Manual (Page 12)

PFD1/PFS1 – OPERATING INSTRUCTIONS
INDEX DATE N°
03 27/09/01 DC01020US
11/11
VI.3.7 – Replacing other parts
When dismantling the pump or control unit for service, components found damaged should be
replaced. Alternatively, the pump/control unit can be returned to your distributor or SGPPL
ASTI for examination, estimate, and repair.
Important: Please indicate what chemical was handled, the frequency of use, and the reason for
returning the pump.
A receipt note “Conditions of use” is at your disposal. Do not hesitate to ask for it when needed.
An estimate for repair will be proposed to you and the pump will be returned to you within one week from
date of its acceptance.
VII – Warranty
SGPPL ASTI pumps and accessories are warranted for all parts and labor against faulty workmanship
(return to factory) for one year from delivery date (9000 hours of use).
SGPPL ASTI is not responsible for damage to its products through improper installation, maintenance,
use or attempts to operate them beyond their mechanical capacity, intentionally or otherwise, or for
unauthorized repair.
SGPPL ASTI shall not be liable for any indirect, special, incidental or consequential damages resulting
from the use, failure or malfunction of any product.
® Du Pont's registered trademarks
™ Saint-Gobain Performance Plastics Asti trademark