Shark HP-5030D - Manual (Page 5)

97-61 • rev. 5/07
5
PRESSURE
W
ASHER
OPERA
TOR’S MANU
AL
WaRNiNg
RiSk oF FiRe.
do NoT add FUel
WHeN oPeRaTiNg
MaCHiNe.
WaRNiNg
RiSk oF
aSPHYxiaTioN.
USe oNlY iN a Well
veNTilaTed aRea.
use caution when operating. do not point the spray
gun from the attached pressure washer at anyone
or at any part of the body. this machine is to be
used only by qualified operators.
8. never make adjustments on machine while it is in
operation.
WARNING: High pressure spray
from attached pressure washer
can cause paint chips or other
particles to become airborne
and fly at high speeds.
9. eye safety devices must be
worn when using this equip-
ment.
WARNING: Risk of asphyxiation
— Use this product only in a
well ventilated area.
10. When the machine is operat-
ing, do not cover or place in a
closed space where ventila-
tion is insufficient.
WARNING: Risk of fire — Do
not add fuel when the machine
is operating or still hot.
11. attached pressure washer
with a spray gun should not
be operated with the spray
gun in the oFF postion for
extended periods of time as
this may cause damage to
the pump.
check to make sure burner shuts off when spray
gun trigger is closed.
12. protect from freezing.
1. to prevent a serious injury, make certain quick
coupler on discharge hose has locked before using
pressure washer.
14. do not allow acids, caustic or abrasive fluids to
pass through the machine.
15. inlet water must be from a cold water pressure
washer (3,000 PSI maximum).
16. do not allow cHildren to operate the pressure
washer at any time. THiS MaCHiNe MUST be
aTTeNded dURiNg oPeRaTioN.
17. the best insurance against an accident is precau-
tion and knowledge of the machine.
18. do not operate this product when fatigued or under
the influence of alcohol or drugs. Keep operating
area clear of all persons.
19. We will not be liable for any changes made to
our standard machines, or any components not
purchased from us.
20. do not overreach or stand on unstable support.
Keep good footing and balance at all times.
21. Follow the maintenance instructions specified in
the manual.
22. When making repairs disconnect from electrical
source.
2. turn burner off and open spray gun to allow water
to flow and cool coil to 100°F before turning ma-
chine off.
24. Before disconnecting high pressure hose from
machine water outlet, open spray gun to relieve
back pressure in hose.
CAUTION: This machine produces hot water and
must have insulated components attached to pro-
tect the operator.
WaRNiNg
PRoTeCTive
eYeWeaR aNd CloTH-
iNg MUST
be WoRN.
iMPoRTaNT SaFeTY iNFoRMaTioN