SanDisk uSSD 5000 - Manual (Page 5)

SanDisk uSSD 5000 Product Manual
1.2 Features
The SanDisk uSSD 5000 provides the following system features:
• Non-volatile storage (no battery required)
• USB 2.0 interface, certified by the USB organization
• Complies with Microsoft Vista
ReadyBoost® requirements
• Up to 8 GB of mass storage based on SanDisk’s reliable flash technology
• SLC flash and MLC flash-based configurations
• Fixed configuration (not removable)
• Low power consumption
• High performance:
Sustained Read and write speed of up to 31.6 MB/sec for reading,
24.8 MB/sec for writing (SLC configuration)
• Rugged
• Lightweight
• Silent
• Standard and low profile
• Advanced error detection and error correction algorithms
• Advanced wear-leveling algorithms
• Guaranteed data integrity even after power loss
• MTTF* > 4,000,000 hours
• Multiple OS support
• Warranty: 3 years
* Based on internal testing. The MTTF calculation does not take into account the disk endurance
limitation. For the disk endurance, please refer to the endurance section on page 9.
© 2007 SanDisk® Corporation 4 August 2007