Sangean Sangean- RCR-3 - Manual (Page 7)

6
GB
Operation
Power On
Automatic radio station presetting and clock setting
1. Connect the plug to a wall socket at the first time, the radio will
automatically preset AM and FM stations. 7 highest frequency
stations from both AM and FM.
2. Then your clock radio will display -:- and the indicator will
flash on the display. The time will be set if the auto time set
service is available.
3. When the radio is off, press and hold Time button for more
than 4 seconds to receive Auto Time Set signal.
Clock
Manual clock setting (only if automatic setting fails)
1. Press the TIME button, and the display will show .
2. Press the SET button, and the hour digits will flash on
the display.
3. Press the TUNING up or down button to adjust the hours.
4. Then press the SET button, and the minute digits will flash on
the display.
5. Press the TUNING up or down button to adjust the minutes.
6. Press SET button to complete the time setting.
* You can also stop the process and save the setting anytime
by pressing TIME button.