Stamina Products 35-1650F - Manual (Page 8)

8
STEP 5: Place the trampoline in the normal use position. Make
sure that the SAFETY PAD(6) covers the Springs on the
INMOTION trampoline. Stand on the trampoline to make all six
legs set flat on the floor. Refer to illustration 5.
STEP 6: Post the USE INSTRUCTIONS SIGN(16) in a highly
visible and safe location. The USE INSTRUCTIONS SIGN(16) shall
be placed such that it will be readily visible to the intended viewer.
5.
CORRECT PLACEMENT OF
SAFETY PAD
The SAFETY PAD(6) must be securely attached
to the frame before using the trampoline. It must
be properly positioned as shown in illustration 5.
ASSEMBLY INSTRUCTIONS
STEP 4: The two LEGS(7) with a Warning Label must
be on opposite sides of the INMOTION trampoline.
Screw one of the LEGS(7) with a Warning Label onto
a threaded connector on the rail frame. Attach the other
LEG(7) with a Warning Label to the threaded connector
directly opposite the other LEG(7) with a Warning
Label. Screw the other four LEGS(7) onto the threaded
connectors on the rail frame. Refer to illustration 4.
4.
Warning
Label
Warning
Label
WARNING: !