Sony CMR-PC2 USB - Manual (Page 10)

10
6
If driver installation was successful, “SONY USB CAMERA
Video Capture Device” is displayed under “System Properties” -
“Device Manager” - “Imaging Device”.
Uninstalling the Drivers, “SONY USB CAMERA Still
Capture” and “SONY USB CAMERA Video Recorder”
If installation of the drivers fails, use the following procedure to
uninstall the drivers. Then perform the installation procedure again.
Note
First close down the software to be used with the camera.
1
Disconnect your camera from the computer.
2
Click the [Start] button on the task bar, point to [Setting], and then
click [Control Panel].
The “Control Panel” appears.
3
Double-click [Add/Remove Programs] in the “Control Panel”.
The “Add/Remove Programs” dialogue box appears.
4
Click the [Install/Uninstall] tab.