Sony CDU926S User Manual

Page 3

Advertising
background image

Introduction

The CDU926S is a drive unit for CD-R discs, which stores a maximum of
650 Mbytes of digital data.

The drive unit has the following features:

Reads and writes data in both CD-ROM and CD-ROM XA standard
formats.

Reads and writes data in CD-BRIDGE format which includes
PHOTO-CD.

Reads standard CD-DA (“Red Book”) encoded discs, and reads and
writes CD-R discs conforming to “Orange Book Part II.”

Supports the following write modes: Track at once, Variable packet,
Fixed packet and Multisession.

Outputs the audio as 16-bit digital data over the SCSI interface.

Supports read and write operation at both standard speed and double
speed, and read-only operation at sixfold speed.
Supports real time error correction at all speeds.

5 1/4 inch half-height drive form factor.

SCSI bus interface embedded. (Based on SCSI-2)

512 kB buffer memory.

Capable of audio CD playback provided with audio line output and
headphones jack.

Fast access time assures high-speed reading and writing operations.

CD caddy for disc protection.

Power loading and power eject.

Automatic locking of the optical pick-up when the caddy is ejected.
This ensures safety during transport.

Emergency eject function which allows the caddy to be ejected
manually.

Capable of real time layered error correction.

Employs a casing with an airtight frame.

Software requirement

Install the appropriate application software before using this unit.

Introduction 5

Contents

Introduction

5

Location and Function of Parts and Controls

6

Front Panel .............................................................................................................6
Rear Panel .............................................................................................................7

Precautions

8

Example of System Setup

8

Installing the Drive Unit into the Computer

9

Getting Started .......................................................................................................9
Setting the Jumpers ...............................................................................................9
Opening the Computer .........................................................................................11
Connecting the Drive............................................................................................12
Mounting the Drive ...............................................................................................13
Host Adapter Installation ......................................................................................15
Closing the Computer...........................................................................................16

Installing the Software Driver

17

Using Discs and Caddies

18

Loading a Caddy with a Disc ...............................................................................18
Storing Discs and Caddies ...................................................................................20
Care of Discs........................................................................................................20

Operating the Drive

21

Starting Up ...........................................................................................................21
Ejecting a Caddy ..................................................................................................22

Specifications

24

4

Advertising