Senco 42XP - Manual (Page 2)

Construction Ruler –
For quick measurements
Adjustable Exhaust
Stretch Comfort Grip –
Reduces fatigue, increases productivity
Magnesium Housing –
Lightweight
No-Mar Pad –
Protects work surface
Extra No-Mar Pads –
Mounts onboard tool
EZ-Clear ™ Guide Body –
To clear jams fast
Overmold Trigger –
Reduces fatigue
5-Year Limited Warranty –
XP Durability
Thumb Wheel Adjustable Depth-of-Drive –
Drives nails to a consistent and controllable depth
NeverLube ® Technology –
Requires no tool oil
FinishPro
®
42XP
XtremePro ™ 15 Gauge Finish Nailer
Choose the right trigger system for your specific needs!
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire)
operates in the following a sequence - depress the safety element at the nose of tool
against the work surface then pull the trigger. After each fastener is driven, release the
trigger and lift the tool off the work surface before starting the sequence again. This
trigger is recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom fire)
operates in the following sequence- pull the trigger first and keep the trigger pulled
while moving the tool along the work surface with a bouncing motion, depressing
the safety element at the nose of the tool against the work surface where the fastener is
to be driven. This trigger is recommended for use by trained professionals only in
high production or volume applications.
®
©2007 Senco Products, Inc. www.senco.com
Always read the Operators Manual and Safety Instructions with all tools to
ensure proper use and safety precautions. For additional information on trigger
systems and how SENCO will save you time, reduce costs, and increase
quality, call our toll-free Action Line: 800-543-4596 to find your nearest
Authorized Senco Dealer, Distributor or isit our web site at: www.senco.com