Sony BRAVIA KDL-32D28xx - Manual (Page 26)

26 GB
Set-up menu
You can select the options listed below on the
Set-up menu. To select options in “Settings”, see
“Navigating through menus” (page 19).
Auto Start-Up
Starts the “first time operation menu” to select the language and country/region, and
tune in all available digital and analogue channels. Usually, you do not need to do
this operation because the language and country/region will have been selected and
channels already tuned when the TV was first installed (page 6). However, this
option allows you to repeat the process (e.g., to retune the TV after moving house,
or to search for new channels that have been launched by broadcasters).
Language
Selects the language in which the menus are displayed.
Auto Tuning
Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned
when the TV was first installed (page 6). However, this option allows you to repeat
the process (e.g., to retune the TV after moving house, or to search for new channels
that have been launched by broadcasters).
Programme Sorting
Changes the order in which the analogue channels are stored on the TV.
1
Press F / f to select the channel you want to move to a new position,
then press g .
2
Press F / f to select the new position for your channel, then press .
AV Preset
Assigns a name to any equipment connected to the side and rear sockets. The name
will be displayed briefly on the screen when the equipment is selected. You can skip
an input source that is not connected to any equipment.
1
Press
F
/
f
to select the desired input source, then press .
2
Press F / f to select the desired option below, then press .
• AV1 (or AV2/ AV3/ AV4/AV5/AV6/AV7/ PC), VIDEO, DVD, CABLE, GAME,
CAM, SAT : Uses one of the preset labels to assign a name to connected equipment.
• “Edit”: Creates your own label.
1
Press F / f to select the desired letter or number (“_” for a blank
space), then press g .
If you input a wrong character
Press G / g to select the wrong character. Then, press F / f to select the correct
character.
2
Repeat the procedure in step 1 until the name is completed.
3
Select “OK”, then press .
• “Skip”: Skips an input source that is not connected to any equipment when you
press
F/f to select the input source.
Set-up
Select: Enter: Exit: MENU
Auto Start Up
Language
Auto Tuning
Programme Sorting
AV Preset
HDMI Set-up
Sound Offset
Manual Programme Preset
Digital Set-up
English
Back:
010COV.book Page 26 Thursday, July 12, 2007 3:45 PM