Sanyo LNS-S30 - Manual (Page 4)

5 MOUNT THE LIGHT-BLOCK SHEET AND LIGHT-BLOCK SHEET BASE
(See Figure-6-1 and 6-2)
6 MOUNT THE FRONT CABINET AND LENS
COVER (See Figure-6-1, 6-2 and 7)
Mount the light-block sheet on the lens as shown in the Figure-6-1 and 6-2. (In the
same position as the removed sheet has been placed). Use the sheet included with
the lens. Make sure the part no. and mark (TOP and BACK) on Light-Block Sheet
and set them properly.
Mount the light-block sheet base.
1 .
2.
UP
LIGHT-BLOCK
SHEET BASE
FRONT
CABINET
LENS COVER
LIGHT-BLOCK
SHEET
Mount the front cabinet with 2 screws.
Mount the lens cover.
For the cabinet Fig. 1-1, position the marked UP of
Lens Cover on top and push in to the front cabinet
and turn the Lens Cover fully clockwise until it is
properly locked.
For the cabinet Fig. 1-3, push the Lens Cover onto
the cabinet
1 .
2.
Fig-7
-4-
Fig-6-2
UP
LIGHT-BLOCK
SHEET BASE
FRONT
CABINET
LENS COVER
LIGHT-BLOCK
SHEET
Fig-6-1
FOR LNS-S30 FOR LNS-S31