Savin 2022 - Manual (Page 63)

Settings You Can Change with User Tools
51
4
Settings You Can Change with User Tools
Reference
To access User Tools, see p.50 “Accessing User Tools (System Settings)”.
General Features
❖ ❖ ❖ ❖ Panel Tone
The beeper (key tone) sounds when a key is pressed.
Note
❒ Default: ON
❖ ❖ ❖ ❖ Warm Up Notice (copier/Document Server)
You can have the beeper sound when the machine becomes ready to copy af-
ter leaving Energy Saver mode, or when the power is turned on.
Note
❒ If the Panel Tone setting is “OFF”, the beeper does not sound, whatever the
Warm Up Notice setting.
❒ Default: ON
❖ ❖ ❖ ❖ Copy Count Display (copier/Document Server)
The copy counter can be set to show the number of copies made (count up) or
the number of copies yet to be made (count down).
Note
❒ Default: Up (count up)
❖ ❖ ❖ ❖ Function Priority
You can specify the mode to be displayed immediately after the operation
switch is turned on, or when System Reset mode is turned on.
Note
❒ Default: Copier
RussianC3_ENgsg-F_FM.book Page 51 Monday, June 16, 2003 6:48 PM