SMC Networks Redundant Power Unit SMCRPU600W - Manual (Page 15)

3
I
NSTALLING THE
RPU
The RPU may be placed on a desktop or mounted in a rack.
Caution: Warning: DO NOT place the RPU on the floor as the case is
not waterproof.
RPU Packing List
• Redundant Power Unit — provides backup power to four SMC
devices
• One AC Supply Power Cord — US, Continental Europe or UK
• One DC Backup Power Cord — with IEC connectors on both ends
• Rack Mounting Kit — brackets and screws
• Star-head screwdriver
• This User Guide
• Warranty Registration Card — be sure to complete and return to SMC
Desktop or Rack Mounting
You can set the RPU on a desktop or flat surface near a separate AC power
source and close to the device to which it is to supply power. To mount the
RPU in a standard EIA 19-inch rack, use the brackets and screws supplied
with the RPU. Use a cross-head screwdriver to attach the brackets to the
side of the switch. Position the RPU in the rack by lining up the holes in
the brackets with the appropriate holes on the rack. And then use the
supplied screws to mount the RPU in the rack. (Leave about two inches of
space on the sides of the RPU to ensure adequate ventilation.)