Sharp AR-275 User Manual
Page 27
NORMAL COPYING
25
2
MA
KING COP
IE
S
3
Ensure that the desired paper tray is selected.
4
Set the number of copies using the numeric keys.
●
A single copy can be made even when "0" is displayed.
●
Press the CLEAR key to clear an entry if a mistake is made.
5
Press the START key.
●
The number in the copy quantity display will decrease by 1 each time a copy is made.
●
To repeat the same copy sequence for a different original, simply replace the original and
press the START key.
●
Press the CLEAR key to stop copying in the middle of a run.
NOTES:
●
When copying a book or an original which has been folded or a crumpled original, press down
lightly on the platen cover. This will reduce shadow lines caused by uneven contact between
the original and the platen glass.
●
The platen cover can be removed to allow copying of bulky objects. To remove it, open the
platen cover and lift it at a slightly backward angle. To reattach the platen cover, reverse the
above procedure.
The capacity of the center tray is 500 sheets (400 sheets for 11" x 17", 8-1/2" x 14", A3, and B4 sizes).
When the number of copies output reaches this limit, copying will stop and the START key indicator will
go out. Remove the copies from the center tray and press the START key to resume copying.
8 11
1
2
/
Ready to copy.
8 11
1
2
/
100%
100%
AUTO
AUTO
8 11
1
2
/