Sony DVP-M35 - Manual (Page 16)

Basic Operations
16 EN
Click shuttle
JOG
Notes
• Depending on the VIDEO CD,
you may not do some of the
operations described on the
right.
• When you play a VIDEO CD,
there is no sound except for the
playback at normal speed.
Notes
• The JOG indicator shows the
mode of the click shuttle close
to the indicator only. When the
indicator on the remote does
not light up, it keeps shuttle
mode on the remote even if the
indicator on the player lights
up.
• If you don’t operate the click
shuttle for about 20 seconds
after pressing JOG, it returns to
shuttle mode on the remote.
On the player, it keeps jog
mode.
To play at various speeds / frame-by-frame
Using the click shuttle and the JOG button/indicator, you can
playback a CD/VIDEO CD with various speed or frame-by-frame.
Each time you press JOG, it changes between shuttle mode and jog
mode.
pTo change the playback speed (Shuttle mode)
Turn the click shuttle. The playback speed changes depending on the turning
direction and angle as follows:
FF2 ) (Faster than “FF1)”)
<
FF1 )
<
×
2 ” (about twice the normal speed)
<
PLAY ( (Normal speed)
<
SLOW1 & (playback direction)
– VIDEO CD Only –
<
SLOW2 & (playback direction
– Slower than “SLOW1 &”)
– VIDEO CD Only –
<
PAUSE P
<
FR1 0
<
FR2 0 (Faster than “FR10”)
If you turn the click shuttle quickly, the playback speed goes to FF2/FR2 at
once.
pTo play the VIDEO CDs frame-by-frame changing the playback speed (Jog mode –
VIDEO CD Only)
1 Press JOG.
The JOG button lights up during jog mode. When you press JOG, the
playback is paused.
2 Turn the click shuttle.
Depending on the turning speed, the playback goes to frame-by-frame toward
the playback direction only. If you turn the click shuttle with constant speed for
a while, the playback speed goes to slow or normal.
To return to Continuous Play
Press
·.
Click shuttle JOG