Sennheiser SK 5212 - Manual (Page 17)

16
After switch-on
After switch-on, the standard display is shown on the LC display panel
¿
.
Depending on the setting, the tr ansmission frequency, the channel number
or the name of the transmitter is displayed.
Displaying the menu settings in display mode
In display mode, and with the lock mode activated, you can display the
current menu settings one after the other (see “Overview of the operating
menu” on page 19). After a few seconds, the displ ay returns to the
standard display.
Changing to the selection mode
To change from display mode to selection mode, you have to deactivate the
l ock mode.
̈
Deactivate the lock mode as described in the chapter “Deactivating the
autolock function temporaril y” on page 14. You can now select the
menu whose settings you want to adjust.
̈
Pr ess the multi-function switch
¾
(switch position
țSET
) to change to
the menu that was displayed in display mode.
Selecting a menu
̈
Slide the multi-function switch
¾
to the
position
̆
(UP) or
̄ (DOWN) to display the
menu settings. If you slide the multi-f unction
switch repeatedly to the same position, all
menu settings are displayed one after the
other.
̈
Slide the multi-function switch
¾
to the position
̆
(UP) or
̄ (DOWN).
̈
Pr ess the multi-function switch
¾
(switch
position
țSET
).
The name of the selected menu starts flashing.
SET
DOWN UP
¾
SET
DOWN UP
¾