Kenwood DDX7039M - Manual (Page 62)

62 DDX7039
Setup Menu
Language Setup
Selects a language you use for the speech and
menus.
1 Select the language item to set
Refer to <DVD Setup> (page 61) and select
[Menu Language], [Subtitle Language] or
[Audio Language].
2 Display the Language SETUP screen
5
2
1
3
4
1 Enters a language code.
2 Cancels the language setup and returns to
the DVD SETUP 1screen.
3 Sets the original audio language.
(It appears during Audio Language setup.)
4 Sets the language and returns to the DVD
SETUP 1 screen.
(It appears after you have entered a
language code.)
5 Clears the language code.
3 Enter a language code
See <DVD Language Codes> (page 90) and
select the desired language.
6
7
8
9
6 Sets an angle mark display. ( On)
7 Selects the screen display mode.* 1 ( 16:9)
"16:9": Displays wide pictures.
"4:3 LB": Displays wide pictures in the Letter
Box format (having black stripes at
the top and bottom of screen).
"4:3 PS": Displays wide pictures in the Pan &
Scan format (showing pictures cut
at the right and left ends).
8 Displays the Parental Lock screen.* 1 ( Off )
(See <Parental Level Setup>, page 63)
9 Keep "Auto" to use.* 1
⁄
• *1 Disabled when a DVD is being played.
10
11
p Selects a picture display time. * 1 ( Middle)
The Display of a JPEG picture is changed.
"Short", "Middle", "Long"
q Selects the Picture Signal Type.* 1
( PAL) "NTSC" or "PAL"
(Function of Type M)
⁄
• *1 Disabled when a DVD is being played.