Setting a response beep – Kodak DC3800 User Manual
Page 31
Advertising
3
25
Setting a Response Beep
With this setting, the camera beeps to let you know when certain functions are
being performed. You can set the camera to make sounds for most functions,
or to make no sounds at all.
1
With the camera on, turn the Mode dial
to Setup.
2 Press a
button until Beep
is highlighted.
3 Press the OK button to display the
Beep screen.
4 Press the
button until On
is highlighted.
5 Press the OK button to accept the changes.
Note:
This setting remains until you
change it.
Advertising