Kambrook recommends safety first, Important safeguards for your kambrook duraglide, Anodized iron – Kambrook DURAGLIDE KI820 User Manual

Page 4

Advertising
background image

4

Kambrook Recommends Safety First

IMPORTANT: Please retain your

instruction book for future use.

At Kambrook, we believe that safe performance is the first priority in any

consumer product, so that you, our valued customer can confidently

use and trust our products. We ask that any electrical appliance that

you use be operated in a sensible fashion with due care and attention

placed on the following important operating instructions.

Important Safeguards For Your Kambrook

DuraGlide

Anodized Iron

• Carefully read all instructions

before operating the Kambrook

DuraGlide™ Anodized Iron for

the first time and save for future

reference.

• To protect against electric shock, do

not immerse the iron, cord or plug in

water or any other liquid.

• Do not use the iron for anything

other than its intended use.

• Always turn the Variable

Temperature Control to minimum,

then switch off at the power outlet,

then unplug the appliance when

not in use.

• Allow the iron to cool completely

before storing in an upright position

on its heel.

• Do not touch hot surfaces. High

temperatures are generated during

use, which could cause burns.

Always use the handle and warn

others (especially children) of the

possible dangers of burns from

steam, hot water or hot soleplate,

especially when ironing vertically.

• Regularly inspect the supply cord,

plug and actual appliance for

any damage. If damage is found

in any way, or the iron has been

dropped, immediately cease use

of the appliance and return the

entire appliance to your nearest

authorised Kambrook service centre

for examination, replacement or

repair.

• Store the unit out of reach of

children.

• Do not leave the appliance

unattended when in use.

• The iron must be used and rested on

a stable surface.

• When placing the iron on its stand,

ensure that the surface on which

the stand is placed is stable.

• The iron is not to be used if it has

been dropped, if there are visible

signs of damage or if it is leaking.

• Do not allow the iron to lay flat on

the soleplate when stored as water

may seep through the steam holes,

if the tank is not empty.

Advertising