Kenwood DDX8024BT - Manual (Page 56)

56 DNX9240BT/DDX8024BT/DDX8054BT
Audio Control
Zone Control
You can set the front and rear audio source.
Display the Zone Control screen 1
Touch [ ] > [ ] > [Zone Control]. (page 54)
Set the Zone Control 2
[Single Zone] Turns off the dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
⁄
When the rear speaker sound is switched, the audio •
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
⁄
There are following limitations when zone function is set •
to "ON".
- There is no output from the subwoofer and the center
speaker.
- <Equalizer Control> (page 55), <SRS WOW Control>
(page 56), <Surround Control> (page 57), <Position>
(page 58), <DSP Bypass Control> (page 72), <Speaker
Setup> (page 73), <Car Type (DTA) Setup> (page 74),
and <Channel Level> (page 76) are not available.
SRS WOW Control
You can set up the SRS WOW effect.
Display the SRS WOW Control screen 1
Touch [ ] > [ ] > [SRS WOW]. (page 54)
Set the SRS WOW Control 2
1 1 1
1 Sets a SRS WOW.
You can select any of the following sound
fields.
"OFF"/ "LOW"/ "MIDDLE"/ "HIGH"/ "USER"
SRS WOW User Setup
Display the Audio SRS Adjust screen 1
Adjust the Audio SRS 2
1 1 1
1 Selects a speaker to be set (Front, Rear or
Center speaker).
[TruBass] Sets the TruBass effect level.
[FOCUS] Sets the FOCUS effect level.
[SRS 3D] Sets the SRS 3D effect level.
⁄
FOCUS: Adjusts the vertical position of the speaker and •
sound image by virtual adjustment.
TruBass: Assists the playback for the super bass sound. •
SRS 3D: Makes a natural 3D sound field. •
Some items cannot be adjusted depending on the •
selected speaker.
SRS WOW control is not available in tuner source and TV
•
source.