Konica Minolta 505si - Manual (Page 16)

29
REWINDING THE FILM
28
USING THE BUILT-IN FLASH
1. Turn the function dial to .
2. Press the function button and
turn the control dial until
and ON appear in the data
panel.
• Warn your subject that the flash will fire a
few short flash bursts just before the
picture is taken.
Turn the function dial to ,
then press the function button
and turn the control dial until
and OFF appear in the data
panel.
Red-Eye Reduction
Light reflecting from your subject’s eyes may produce the effect
known as red-eye. Use the built-in flash’s red-eye-reduction mode
to produce more natural looking photographs by reducing the red-
eye effect.
Cancelling Red-eye Reduction
1. Wait until the film is
completely rewound.
• will appear and will blink in the data
panel.
2. Slide the back-cover release
down to open the back cover.
3. Remove the film, then close
the back cover.
1. Press the manual-rewind
button.
2. Follow steps 1-3 from
Automatic Rewind.
Automatic Rewind
After you have exposed the last frame, the camera will automatically
rewind the film. When the film is completely rewound, the motor will
stop and
will blink in the data panel indicating it is safe to open
the back of the camera.
Manual Rewind
Use manual rewind to rewind the film before the current roll is
finished.