Konica Minolta Magicolor 2430DL - Manual (Page 24)

Working With the Printer Status Monitor Center 16
Working With the Printer Status Monitor
Center
Introduction
Printer Status Monitor Center is an application that shows the status of multi-
ple printing devices connected to the host through local ports (USB) or net-
work ports. Printer Status Monitor Center locates network printing devices by
using the Service Location Protocol (SLP), and only supports printing devices
responding to KONICA MINOLTA–specific SLP and PJL queries such as the
magicolor 2300 DL and the magicolor 2430 DL.
"
If a KONICA MINOLTA product is not compatible with both SLP and
KONICA MINOLTA–specific PJL, Printer Status Monitor Center cannot
be used.
"
You need to enable Bi-Directional Support from Printer Properties in
order to work properly when opening the Printer Status Monitor Cen-
ter.
System Requirements
„ Operating System
Windows XP/Server 2003/2000/Me/98SE/NT 4.0
„ Printer Ports Supported by Printer Status Monitor Center
– Ethernet port
– USB port
Opening the Printer Status Monitor Center and Showing
the Supplies Status
Follow the appropriate operation described below to open the Printer Status
Monitor Center.
„ Windows XP/Server 2003—From the start menu, choose All Programs,
KONICA MINOLTA, magicolor 2430DL Utilities, and then magicolor
2430DL Printer Status Monitor Center.
„ Windows 2000/Me/98SE/NT 4.0—From the Start menu, choose Pro-
grams, KONICA MINOLTA, magicolor 2430DL Utilities, and then magi-
color 2430DL Printer Status Monitor Center.