Konica Minolta DiMAGE_A2 - Manual (Page 132)

132 Setup menu
LCD Brightness
The brightness of the EVF and LCD monitor is set independently of
each other. Select the display to adjust using section 1 of the
setup menu; the corresponding monitor activates automatically
and the brightness screen is displayed. LCDbrightness Monitor
Shortcut help EVF
Transfer mode
EVF auto swtch
Video output
Language
:select :enter
Set LCD brightness
High Low Brightness is controlled in eleven levels. Use the
left/right controller keys to adjust the brightness The
monitor will adjust accordingly. Press the central but-
ton of the controller to set the level and complete the
operation. Press the menu button to close the screen
without applying any changes.
Shortcut Help
The shortcut help shows button commands to open the LCD
brightness screen, change the focusing screens, switch between
the digital zoom and Flex Digital Magnifier, open the setup menu,
or reset the camera. To close the help screen, press the menu but-
ton.
The following shortcuts can be used:
Press and hold the display infor-
mation button to open the LCD
brightness screen.
:select :enter
Set LCD brightness
High Low
Func+i button
Func+
Func+Menu butt
Shortcut help
i button LCDbrightness
Focus screens
Digi.zoom<>
Setup menu
Reset camera Func+QV button
button
Func+ button EVF mode