Kyocera Cyclops K325 - Manual (Page 57)

User Guide for the Cyclops Phone 49
– Quality sets the picture compression. The
higher the compression, the better the
detail of the picture (higher pixel rate).
Options are Low, Medium, or High
(default). When set to High, the picture
file size is larger, using more memory.
– LED flashes a light to indicate a picture
has been taken. Options are Off (default)
and On.
– Viewfinder Display options are Full screen
and Actual.
Restoring camera menu settings
The following settings revert to the default
setting each time you enter and exit the
camera application:
– Low Light Mode, Self Timer, MultiShot,
Color Tone, and Viewfinder.
The following settings remain at the setting
you selected each time you enter and exit the
camera application:
– Flash, Resolution, Shutter Sound, White
Balance, Quality, and LED.
Menu options for picture mode
1. Press and hold to activate picture mode .
2. Select Options .
3. Press up or down to scroll through the
options on the vertical menu bar:
–
Settings displays available camera settings
you may set up prior to taking a picture.
– Brightness allows you to adjust the
brightness of the image in the main
screen LCD.
– My pictures displays all pictures taken
and stored.
– Last Picture displays the most recently
taken picture.
– Frames allows you to add a frame or a
stamp to your picture. A frame or stamp
cannot be removed once it is used in
a picture.
Note: The picture resolution changes to
160 x 120 while taking pictures with frames.
The resolution returns to the original setting
once Frames is disabled.