Using the single desktop charger – Samsung SPH-N300 User Manual

Page 25

Advertising
background image

Getting to Know Your Sprint PCS Phone

25

Getting Started

2

Using the Single Desktop Charger

When you are ready to charge your battery, it is vital that
you use only Sprint PCS-approved desktop chargers and AC
adapter chargers.

1.

Plug the single desktop charger’s power cord into a wall
outlet.

2.

Insert the phone (with the battery installed) into the
front of the charger.

The LED on the front of the phone indicates the following:

A

red light

indicates the battery is charging.

A

green light

indicates the battery is at least 90

percent charged.

A

orange light

indicates that the battery is operating

at a temperature that is too high or too low, or that
there is a poor connection. Make sure the phone is
resting in the charger.

It generally takes about three hours to fully recharge a
completely rundown battery. With the Sprint PCS-approved
LiIon battery, it is practical to recharge the battery before it
becomes completely run down.

To get the quickest charge for any battery:

Turn the phone off.

Plug the phone with the battery attached into the

travel adapter.

Leaving the phone plugged into the travel adapter

fully charged will not harm the battery.

Advertising