Krell Industries Evolution - Manual (Page 11)

11
Unpacking and Placement
This section describes the procedures for safely unpacking and placing your
Evolution amplifier. The amplifier and accessories are shipped in 1 carton. The
dimensions of the amplifier are shown in the specifications section starting on
page 30.
Two people are needed to remove the Evolution amplifier from its shipping box
safely and easily.
Opening the Evolution Amplifier Shipping Carton
1. Open the shipping carton and remove the top layer of foam. The carton con-
tains these items:
1 Evolution amplifier chassis
1 20 amp AC power cord
1 12 VDC (12 V trigger) cable
1 Packet containing the Quick Setup Guide and the warranty registration card
2. Orient the shipping box so that one person stands at the front of the amplifier
and one person stands at the back of the amplifier. Both people need to grab
a pair of the cardboard handle cutouts (one pair located at the front of the
amplifier and one pair located at the back of the amplifier) and simultaneously
lift the amplifier straight up, out of the carton. Bend and lift with your knees,
not your back.
3. Place the amplifier in a safe location, and remove the protective plastic wrap-
ping.
Note
Save all packing materials. If you need to ship the Evolution amplifier in future, repack
the unit in its original packaging to prevent shipping damage.
SECTION
TWO
continued