Samsung SGH-200 - Manual (Page 30)

59
Customising your Phone’s Features
(cont.)
2 (cont.)
To... Press...
Cause the phone to beep .
when any invalid action
is taken
Enable the flashing indicator ◆
when the phone is in ◆ or to select
Standby mode I f n e t w o r k or O F F
➢
This selection does not require that you perform
Step 3. Go directly to Step 4.
Activate TX DTMF .
3 To... Press or until
you select...
Activate the option O N
Deactivate the option O F F
4 Confirm your choice by pressing .
Result: The phone goes back to the menu that you have
just selected.
5 To exit the menu system, press .
Customising your Phone’s Features
Your phone comes equipped with a set of pre f e re n c e s
that you can activate or deactivate as re q u i re d .
Example: You want your phone to redial your last
number automatically if your call was
unsuccessful.
1 Enter the menu system, as follows.
◆ Press or .
Result: M e n u O K ? is displayed.
◆ Press .
Result: The first menu appears.
2 To... Press...
Indicate that the call length .
is to be displayed
Set the number of rings ◆
before a call is answered ◆ or to select
automatically 3 R i n g s , 5 R i n g s ,
7 R i n g s or O F F
➢
This selection does not require that you perform
Step 3. Go directly to Step 4.
Allow a call to be answered .
by pressing any button
(except
)
Activate display backlighting .
Allow the phone to beep .
each minute whilst you are
on the phone
Allow automatic redialling .
when a call is unsuccessful
Allow the phone to lock .
automatically when it
switches off
➢
This selection requires that the unlock code be
entered each time you switch the phone on.
58