Samsung SCH-T300 - Manual (Page 56)

54
7. Press to display the “Memory” screen.
8. Enter the desired memory location using the keypad.
9. Press to save and exit.
Note: Follow the steps listed above when memory location 411 or 311 are
accidentally over written.
Pause Dialing
When you call automated systems, you are usually required to enter a
password or account number. Instead of manually entering the
numbers each time, the numbers can be stored in your Phone Book
separated by special characters called pauses.
There are two kinds of pauses that can be entered on your phone:
¨
Hard pause - A hard pause stops the dialing sequence.
¨
Two second pause - A two second pause stops the dialing sequence for
two seconds and then automatically sends the remaining digits.
Your phone has two pause dialing methods: pause dialing from the
Phone Book (see “Pause dialing from a stored phone book entry” on
page 55), and manual pause dialing (see “Manual pause dialing” on
page 56).
Note: Multiple two second pauses can be entered to extend the length of a
pause. For example, two consecutive two second pauses cause a total pause
time of four seconds. However, keep in mind that pauses count as digits
towards the 32 digit dialing maximum.
Storing Pauses in a Phone Book Entry
To store a number in your Phone Book that contains pauses:
1. Enter the phone number you want to store.
2. Press to display options to display the following options: