Kodak C513 - Manual (Page 9)

Doing more with your camera
www.kodak.com/go/c513support 9
Using the zoom button
1 Use the LCD to frame your subject.
2 Press Telephoto (T) to zoom in. Press Wide Angle (W)
to zoom out.
The zoom indicator shows zoom status.
3 Take the picture or video.
NOTE: To get a focused picture every time, remember:
■ Always use the auto focus framing marks.
■ If you are using no zoom (1X, wide angle), you
can be as close as 24 in. (60 cm) to your subject.
■ As you zoom, you need to move further from
your subject.
To use digital zoom in any Still mode:
Press Telephoto (T) to the maximum optical zoom
limit. Release the button, then press it again.
NOTE: You may notice decreased image quality when using digital zoom. The slider on the zoom indicator
turns red when the picture quality reaches the limit for an acceptable 4 x 6-in. (10 x 15 cm) print.
Zoom indicator
W T D
Digital
zoom
range Optical
zoom
range