Krell Industries Evolution 505 - Manual (Page 14)

14
Front Panel Description
Power, transport, and display features are described below (see Figure 1 on the
previous page). Most front panel features can be activated using the remote con-
trol keys. Descriptions of special operational features are outlined on page 24.
Power
1 Power Button or Key
Use this button or key to switch the Evolution 505 between the stand-by and
operational modes.
2 Stand-by/Power LED
This LED illuminates red (stand-by) when the Evolution 505 is plugged into a
standard live AC wall receptacle and the rear panel power switch is turned on.
The LED will illuminate blue (operational mode) when the power button (1) or
key is pressed while the Evolution 505 is in stand-by mode.
Remote Functions on the Front Panel
3 Infrared Sensor
The infrared sensor receives commands from the Evolution 505 remote con-
trol. For proper remote control operation, make sure the infrared sensor is not
covered or obstructed.
Transport Functions
4 Pause Button or Key
Temporarily suspends playback of a track. To resume playback at the point
pause was engaged, press play.
5 Stop Button or Key
Stops disc playback.
6 Play Button or Key
Starts playback from the beginning of the disc. See also How to Play a Disc,
page 16.
7 Open/Close Button or Key
Opens or closes the disc transport.
8 Track Skip Forward and Back Buttons or Keys
Track forward selects the track that follows the current track. Track back
selects the track that precedes the current track. Press repeatedly (do not
hold) to skip multiple tracks.
9 Search Forward and Back Buttons or Keys
Press and hold to scroll forward or backward in the current track. Press play to
return to normal playback.
(SECTION THREE: Anatomy of the Evolution 505 continued)