Installation instructions, Tools and parts, Optional pedestal – Kenmore ELITE HE3 110.8789 User Manual

Page 5

Advertising
background image

5

INSTALLATION INSTRUCTIONS

Tools and Parts

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.

Parts supplied

Remove parts package from dryer drum. Check that all parts are
included.

4 Leveling legs

NOTE: Do not use leveling legs if installing the dryer on a
pedestal.

Parts needed

Check local codes. Check existing electrical supply and venting.
See “Electrical Requirements” and “Venting Requirements”
before purchasing parts.

For close-clearance installations between 31.5" (80.01 cm)
and 37" (93.98 cm), see “Plan Vent System” section for
venting requirements.

Mobile home installations require metal exhaust system hardware
available for purchase from your local Sears store or Sears
Service Center. For further information, please call
1-800-4-MY-HOME

®

(1-800-469-4663).

Optional Pedestal

Are you placing the dryer on a pedestal? You have the option of
purchasing pedestals of different heights separately for this dryer.
You may select a 10" (25.4 cm) pedestal or a 15.5" (39.4 cm)
pedestal with a storage drawer. The pedestal will add to the total
height of the dryer for a total height of approximately
46" (116.8 cm) or 51.5" (130.8 cm), respectively.

For a garage installation, you will need to place the 10" (25.4 cm)
pedestal at least 9" (22.9 cm) above the floor. You will need to
place the 15.5" (39.4 cm) pedestal at least 3" (7.6 cm) above the
floor.

To order, call your local Sears store. For further information,
please call 1-800-4-MY-HOME

®

(1-800-469-4663).

Flat-blade screwdriver

#2 Phillips screwdriver

Adjustable wrench that
opens to 1" (2.54 cm) or
hex-head socket wrench
(for adjusting dryer feet)

Wire stripper (for direct
wire installations)

Level

Vent clamps

Caulking gun and
compound (for installing
new exhaust vent)

Tin snips (new vent
installations)

¼" nut driver or socket
wrench (recommended)

Tape measure

37"
(93.98 cm)

Optional pedestal (15.5" [39.4 cm] model shown)

Pedestal

Height

Color

Part Number

10" (25.4 cm)

White

46822

15.5" (39.4 cm)

White

57822

Advertising
This manual is related to the following products: