Krown Manufacturing 2000 - Manual (Page 19)

The Multi-Wide printing feature of your Porta Printer allows you to select three sizes of letters and
numbers that are printed on your TDD. These three sizes are:
Normal: 20 characters/line
Condensed: 24 characters/line. These characters are a little smaller
than the Normal-Size characters. They may be used if
you wish to save paper by printing smaller characters.
Wide: 12 characters/line. These characters are very large and
bold and are useful for people who have difficulty
reading the Normal-Size characters.
PRESS:
To select Condensed Print, press and hold the [CTRL] key and press [C].
is display.
To select Wide Print, press and hold the [CTRL] key and press [W].
is displayed.
To select Normal Print, press and hold the [CTRL] key and press [N]
is displayed.
NOTE: When the Porta Printer with the Multi-Wide printing feature prints in ASCII, the print will always be condensed
Print. The Porta Printer will remember the print width that you selected. For example, if you select Condensed Print and
then turn your Porta Printer off, your Porta Printer will be in Condensed Print mode when you turn it on again.
If you have the Porta Printer with large display (PP2000DLVD) and want to turn on/off the
printer, press [CTRL] + [P].
TEST MESSAGE
A test message is built into the Porta Printer (PP2000D) to use when testing the printer on the
machine. To test the printer:
The test message is displayed
and printed.
To end the test message.
The Multi-Wide test message
will now print.
V
17
MULTI-WIDE PRINTING FEATURE
CTRL + C CONDENSED PRINT
CTRL + W WIDE PRINT
CTRL + N NORMAL PRINT
CTRL + Q THE QUICK BROWN FOX
CTRL + 9 JUMPS OVER THE LAZY
CTRL + T TEST PATTERN