Attaching the strap, Loading the battery – Kodak ADVANTIX C700 User Manual
Page 11
Advertising
6
ATTACHING THE STRAP
1. Insert the shorter looped
end of the strap
behind the
STRAP
POST
(10).
2. Thread the longer end
of the strap through
the shorter loop.
3. Pull the strap tight.
LOADING THE BATTERY
This camera uses one
3-volt lithium KODAK
K123LA (or equivalent)
Battery that supplies
power for all camera
operations.
1. Open the
BATTERY
DOOR
(11) by using
your finger tip.
• Before you remove
the old battery, close
the lens cover/flash.
2. Insert the battery
into the chamber
as shown.
3. Snap the
battery door
closed.
• After you
load a new
battery into
the camera, you will need to reset the
date and time.
Advertising