Kyocera KX444 - Manual (Page 48)

42 Customizing Your Phone
4. Press to select an option:
– Voice only— Allow only voice calls.
– Fax, next call or Data, next call— Set the
phone to fax mode or data mode for the
next incoming call or the next 10 minutes.
– Fax, until off or Data, until off— Force the
phone into fax mode or data mode until
the phone is turned off.
Note: You cannot receive voice calls while
the phone is in data/fax mode, or if you are
on a PTT call.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
Note: Enable TTY only when using the phone with
a TTY device.
1. Connect the TTY device to the phone.
2. Enter from
your keypad.
3. Press to select the TTY
=
option.
Setting position location
This setting allows you to share your location
information with network services other than
emergency services (911, 111, 000, etc.), in
markets where service has been implemented.
Note: This feature works only when your phone is
in digital mode. You do not have the option of
turning off the locator to emergency services.
1. Select Menu
→
Settings
→
Network
→
Location .
2. If you see a message prompt,
press
to continue.
3. Select 911 Only or Location On .
– 911 Only
=
(default) shares your position
information only with emergency services
when you call your 3-digit emergency
code (911, 000, 111, 999, etc.).
– Location On
=
shares your position
information with the service provider
network, in addition to emergency services.
For information on emergency calls, see “Calling
emergency services” on page 12.