Kustom WAV 212 - Manual (Page 7)

DEL
REV
MOD SAVE
4
1 2
3
GROUP LEVEL FAVORITES
DIGITAL EFFECTS
PUSH ON
CHANNEL SELECT
HIGH VOLUME MID LOW GAIN GUITAR
INPUT
VOLUME HIGH MID LOW PREAMP
BOOST ON SHIFT
TUBE DRIVEN LEAD CHANNEL RHYTHM CHANNEL
CLEAN wAv
CLASSIC CRUNCH
1 2 4 3 5 6
7 8
9
10
11 12
13
14
15
16
18
17 20 19 22 21 23 24
25 26
FAVORITES
1 2 3 4 CHANNEL SELECT BOOST EFFECTS
LEAD RHYTHM
27 28
Front Panel and Footswitch
Favorites buttons:
Group Buttons:
Level/Push on:
Active Status
Effect Status
Group Edit Status
Level Status
Footswitch Favorites Buttons:
Footswitch channel select:
Footswitch Boost
Footswitch Effects On/Off
:
:
:
:
:
:
These buttons select a Favorites bank. Each
channel (Lead or Rhythm) and the “Boost On”
function, has 4 Favorites banks associated with it
for a total of 12 Favorites Presets. These presets are
activated by the
button
and the button . The
preset cannot be selected in the rhythm
channel. For more information, see “Using the
Effects Processor” on page 9.
These buttons allow you to select one of 15 effects
or to bypass each group. The 3 types of groups are
Delay, Modulation, and Reverb. For more
information, see “Using the Effects Processor” on
page 9.
When rotated, this control adjusts the level of the
lighted effect group. Pushing the knob turns the
digital effects section on and off. For more
information, see “Using the Effects Processor” on
page 9.
This section of the display shows which preset is
active and if the digital effects section is on or off.
This section of the display indicates the name of the
effect selected in each group. The word “BYPASS”
is used when no effect in that group is used.
The name of the effect group is displayed at all
times. The Effect Group name with an illuminated
red rectangle around it will be edited by rotating
the
control . Press one of the 3
buttons once to edit the level of
selected effect group.
Indicates the level of each effect group.
Duplicates Favorites buttons on Front Panel.
LED above switch is lit when selected. Front
panel buttons
still work when Footswitch is
connected.
Duplicates button on
front panel. LEDs above this switch indicate
which channel is selected. Front Panel channel
select switch
still works when Footswitch is
connected.
Duplicates button on front panel.
LED above this switch indicates Boost is on.
Lead channel must first be active to activate
boost. Switching to Rhythm channel or pressing
“Boost” again de-activates Boost. Front Panel
channel Boost switch
still works when
footswitch is connected.
Turns on and off the Digital effects. LED is lit
when effects are on. Level push switch still
works when Footswitch is connected.
“CHANNEL SELECT”
“BOOST ON” “BOOST
ON”
“LEVEL”
“CHANNEL SELECT”
“BOOST ON”
“GROUP”
7