Kenwood KW85 - Manual (Page 18)

5
Control panel
All functions of the unit can be controlled from the control panel or the remote control unit (certain models only).
TIMER ON/OFF
button
Press this button to
activate the timer
function (turns the
appliance off if
already on and vice
versa).
SET TEMP buttons
These buttons can
be used to set the
required room tem-
perature in a range
between 17°C
(62°F) and 31°C
(87°F). The tempera-
ture set is increased
or reduced by 1°C
(33°F).
TIMER HOUR button
Press this button to
set the length of
time before the
appliance goes off
(with the
unit on) or comes
on (with the
unit off).
SWING button
Press this button to
distribute the air flow
evenly throughout
the room (swing) or
in a specific direc-
tion (fixed position).
FAN SPEED button
Press this button to
set the speed of the
air flow emitted:
Max (HIGH), Med
(MED), Min (LOW).
MODE KEY
Press this button to
select the various
operating modes:
air conditioning
(COOL), dehumi-
difying (DRY) or ven-
tilating (FAN).
ON/OFF button
Press this button to
turn the air conditio-
ning unit on or off.
F
Standby button
When the indica-
tor light is on, the
appliance is plug-
ged into the outlet.
Tank full
When on, indica-
tes that the tank
needs emptying
displays the opera-
ting mode
COOL/ DRY/ FAN
Air conditioning
Dehumidifying
Ventilating
displays the position
of the air distribution
fins
Indicates that the
keypad is locked
Infrared receiver
(only on some
models)
GB/KW85 17-11-2003 19:21 Pagina 5