Kenmore 241815202 - Manual (Page 10)

10
ENGLISH
CAUTION CAUTION CAUTION CAUTION CAUTION
Wear gloves and use extreme CAUTION when
installing these handles. The rounded end of the
handles may be sharp.
TO ATTACH REFRIGERATOR HANDLE:
1. Place rounded part of handle onto shoulder screw on
face of door and align the 2 holes in top of handle with
the 2 holes in top of door. Handle should be mounted
with set screw facing towards center of door. Do
not tighten the set screw yet.
2. Install the 2 screws into the top of the handle.
3. Tighten the set screw on the rounded part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.
TO ATTACH FREEZER HANDLE:
1. Place rounded part of handle onto shoulder screw on
face of door and align the 2 holes in bottom of handle
with the 2 holes in bottom of door. Handle should be
mounted with set screw facing towards center of
door.Do not tighten the set screw yet.
2. Install the 2 screws into the bottom of the handle.
3. Tighten the set screw on the rounded part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.
TO REVERSE REFRIGERATOR/FREEZER HANDLES:
Handles may be easier to reverse while doors are off.
Reverse freezer and refrigerator handles as shown.
Handle Reversal
IMPORTANT
To ensure proper installation of handles, please review
these instructions and pictures thoroughly prior to
installing the handles.
Additionally, before installing the door handles, make
sure the door swing is correct. Follow instructions in the
Use & Care Guide to reverse the doors, if necessary.
DOOR REMOVAL / REVERSAL INSTRUCTIONS