Konftel 100/D - Manual (Page 7)

ENGLISH
5
Volume settings
Different makes of system telephones function in
different ways. That is why the volume on the
Konftel 100/D must always be accurately adjusted
the first time it is connected. This will ensure the
best function in conjunction with the system
telephone being used.
Lift the handset and place a call.
Switch to loudspeaker operation.
Volume settings for loudspeaker
Loudspeaker volume is set by pressing the – and +
keys.
Note that a volume control on the digital system
telephone will affect the loudspeaker volume on the
Konftel 100/D.
Volume settings for microphone
Press and hold down the Mute key for approxim-
ately 3 seconds until the red LEDs begin to blink
and a repeating tone is heard.
Press – and + to adjust microphone volume, then
speak so that the party on the other end can tell you
whether the volume should be adjusted up or down.
Speak in a normal conversational tone and change
the volume one step at a time.
Press the Mute key when you have completed setting
the volume.
Volume settings are retained even when
power is off.
and
and
VOLUME SETTINGS TELEPHONE
and