KORG D888 - Manual (Page 34)

34
Checking the program
When you reload or select a song that uses an effect, you also
have the option of loading the effect parameter setting that
were saved with that song, regardless of the physical posi-
tion of the EFFECT selector, PARAMETER, and EFFECT
RTN knobs
. In this case, you can use the Effect screen to
check the effect settings.
1) Press the MENU button to access the Menu screen.
2) Use the cursor up/down buttons to select “3. EFFECT,”
and press the ENTER/OK button.
The Effect screen will appear.
In this state when you move the EFFECT selector or
PARAMETER knob
, the screen will switch correspond-
ingly.
3) Press the EXIT/CANCEL button to return to the Menu
screen.
3. Saving effect settings
When you save a song that uses an effect, the current effect
settings will also be saved along with the song.
When you reload or select a song, you can choose whether
these settings will also be loaded. The effect settings consist
of the EFFECT program, and the positions of the PARAME-
TER knob
and EFFECT RTN knob.
If you load these effect settings, they will apply regardless of
the physical position of the EFFECT selector and the PA-
RAMETER
and EFFECT RTN knobs. However when you
move the selector or a knob, the setting will immediately
switch to the corresponding position.