Kenwood KDV-S211P - Manual (Page 19)

English | 19
Accessories
1
..........1
2
..........1
3
..........2
4
..........5
5
..........4
6
..........2
7
..........1
8
..........1
¤
• If the fuse blows, first make sure that the wires have not
caused a short circuit, then replace the old fuse with one
with the same rating.
Installation
Bracket 3 Semusu Screw 4
(M4 x 5 mm)
¤
• Do not use your own screws. Use only the screws provided.
If you use the wrong screws, you could damage the unit.
• Do not install the unit to an unstable place and a place
where it vibrates.
• You can mount the unit at any angle between the regular
horizontal position and the vertical position on its back (0°
through 90°). You cannot mount the unit with the disc slot
facing downwards, angled or upside down.
Installation using the brackets
Installation using the Velcro tapes
Velcro tape 6
Carpet
Tapping Screw 5
(Φ5 x 20 mm)